EBC 10-13' Corvette 6.2L GS, 09-13' Corvette 7.0L Z06 Rear Brake Kit - Redstuff Pads and RK Rotors

**Pictures are Representational, actual products may vary**
Side of Vehicle: Rear
Solid vs Vented:V
Number Of studs: 5
Rotor Diameter (mm): 340
Height (mm): 49
“New” Thickness (mm): 26
“Minimum” Thickness (mm): 24
PCD (mm): 120
Center Hole Diameter (mm): 70.7
Pad Part Number: DP31771/4C
Rotor Part Number: RK7450XD
Pad Type: REDSTUFF
Rotor Type: RK
Vehicle Fitment: 10-13' Corvette 6.2L GS, 09-13' Corvette 7.0L Z06

As EBC’s flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance. Redstuff is only available for heavier and faster cars and does find its self at its best on slightly heavier cars. Selecting the right grade of EBC brake pad for you car is important and you can see the entire EBC selection and how to choose the right brakes for your car by switching to this linked page.

Redstuff brake pads are however as a harder compound does take longer to fully bed in to achieve its highest levels of performance (can be up to 1000 miles/1600 Kms urban use) during which time the odd “Chirp” of brake noise may be heard when starting from cold in damp and cold conditions at walking pace speed. One press of the pedal to clear the rotor of any dampness and this disappears to leave EBC Redstuff a pad that inspires confidence in all cars. The motto is be patient give the pads a full chance to bed down.

Brake dust has been rated by many OEM builders to be a more serious source of complaints than even brake squeal and as such EBC Brakes is proud to bring you with this new EBC Redstuff blend what is probably a world first in a pad that is almost dust free yet delivers performance braking.

Less dust also means less rotor wear and it is almost guaranteed that your rotors will last double as long as when used with the more abrasive steel fibre brake compounds used by almost all of our competition.

EBC Redstuff should be used at both front and rear for optimum balanced brake performance.

EBC Automotive brake rotors are made from G3000 spec cast iron and full specifications and properties can be seen here! Runout figures above this will lead to vibration after 3000 to 4000 miles due to what we call disc thickness variation which is not a warranty condition. So you see this is no cheap import brake disc. These brake discs have the highest integrity and product quality on the aftermarket. An OE quality replacement disc, made of the finest grade iron and a perfect replacement disc for any car.

Every EBC rotor is runout inspected on this machine. Even when manufactured on state of the art precision machines, not even ONE single disc escapes this process guaranteeing perfect disc alignment. If during install you notice runout on your car it will surely be due to a chassis alignment that happens on one in seven cars, usually cased by nudging a kerb or hitting a pothole in the road earlier in driving the vehicle.