QuickJack 7000 lbs. Ext Lift Kit, (7000TLX-110V Lift+ Wall Hangers+ SUV adapter Set)

5175361 QuickJack 7000 lbs. Ext Lift Kit, (7000TLX-110V Lift+ Wall Hangers+ SUV adapter Set)

7000TLX is a 7,000-lb. capacity, extended-length truck lift that's specially made for raising heavy-duty powerhouses. Its 66" lift point reach is ideal for long-wheelbase vehicles, trucks and SUVs. It even fits under most sports cars and sedans

7000XLT Extended-Length Portable Car Lift

The 7,000-lb. capacity 7000XLT is the safest, highest-capacity and longest-reaching portable car lift ever made. Vehicle types with lift points that stretch toward the edges of the wheelbase can finally be serviced by a fully collapsible, open-center car lift. Until the 7000XLT , only two-post and four-post lifts could service such vehicles. Even mid-rise lifts, while popular in many auto detailing shops and repair bays, often struggle with unique lift point spreads. Compared to other QuickJack models, the 66" lift point reach on the 7000XLT allows operator access to more trucks and SUVs than ever before.

Despite the longer, beefier construction, the 7000XLT car lift still reaches its max rise in approximately 30 seconds. A QuickJack truck/SUV adapter kit, sold separately, adds extra rise and convenience.

Like our lower-capacity portable car lifts (the 3500SLX, 5000TL and 7000TL), built-in durable urethane wheels mean the 7000XLT frames can be rolled around, indoors or outdoors, at your convenience. This is our heaviest model, but no bolts are required, and no special wiring is ever necessary.

The 76" frames are longer than our TL models (the same length as the 5000TLX), but they’re still convenient to roll and stow around the garage. An SUV or truck bed can make for perfect transportation to the track or other locations. As long as the ground is level, the assembly can be taken outdoors for use on dirt, gravel, grass, asphalt or concrete. Initial setup is fast and easy, and then it’s seconds to get from stow-to-go.

With a collapsed profile just over 3.5", the 7000XLT needs no extra support crossbeams. It’s the perfect car lift for shops with little space to spare and big vehicles to service.

Extended-length car lift design

The 7000XLT portable car lift has been redesigned to accommodate heavy, high-clearance vehicles with long wheelbases. We’ve increased the overall frame length and lift point spread by 6”. This means the minimum lift point spread is now 6” longer, so smaller vehicles may not fit with the 7000XLT.

TL minimum lift point spread: 37"
TLX minimum lift point spread: 43"

TL maximum lift point spread: 60"
TLX maximum lift point spread: 66"

TL overall frame length: 70"
TLX overall frame length: 76"

7000TLX Left Frame Assembly

7000TLX Right Frame Assembly

1x Hydraulic power unit with control

4x Medium rubber lift blocks (2")

4x Tall rubber lift blocks (3")

2x Short hydraulic hoses

2x Long hydraulic hoses

2x Frame-positioning handles

Fittings and thread tape for setup

Instruction manual

Up to 3 liters of Automatic Transmission Fluid

Air source to inflate air cylinders up to 50 PSI

Assembly tools

Wall Hanger Set

These sleek, black powder-coated wall mounts are the only official hangers designed and engineered by QuickJack. They're guaranteed to safely hold all QuickJack frames when mounted directly into a wall stud. Sold in sets of two.

There are dozens of ways to stow your QuickJack in a garage: lean them against the wall; stack them on top of each other; tuck them together under your vehicle, etc. The opportunities for easy storage are practically endless. Some people prefer to hang their frames on the wall, up and out of the way. These convenient wall hangers are the best way to make that happen.

If you'd like to hang your portable car lift frames on the wall of your garage, our exclusive hangers mount directly into a sturdy wall stud for safe, simple storage. We recommend installing these wall hangers at the same height and high enough so that the frames rest on the floor. This makes it much easier to lift and hang the frames onto the hooks of the wall hangers.

Each mount features a sleek, laser-cut QuickJack logo to provide visible proof that this is the OFFICIAL QuickJack wall mount set. These wall hangers were designed and engineered by the same minds that designed your QuickJack portable car lift, so you know rigorous testing standards were applied and unparalleled safety factors were built in. Real-world testing and advanced computer analysis were performed to ensure quality and long-term resilience.

This twelve‐piece adapter set increases the service capability of the QuickJack BL-5000SLX/EXT, BL-7000SLX/EXT and 6000XLT series by providing stackable adapters that mount inside the lifting block trays.

Let QuickJack reach new heights

Most SUVs and trucks require adapter sets for maintenance. Your portable car lift system is capable of reaching the undercarriage of virtually every vehicle that does not exceed the unit’s lift capacity. Best of all, while using SUV and truck adapters, QuickJack remains perfectly stable and secure at all times.

Take your garage lift to its max extension with as much ease as you would a Mustang or Ferrari. And if you do have a smaller vehicle to work under, it’s easy to replace the adapter set with QuickJack’s conventional stackable rubber blocks takes in no time at all. Just swap them out in the block tray and you’re done!

To support your heavy vehicles, a rugged, cross-textured base pad sits securely in the QuickJack block tray, supporting the same stackable adapters and rounded lift pad that you might see on any frame-engaging car lift. Incredible stability underlines our truck adapter design, maximizing your overall safety. To this end, QuickJack remains CE Certified when the truck adapter set is in use, which means you can enjoy a garage lift that’s truly portable and perfectly suited for light trucks and SUVs.