TSP Gen 3 Hemi Stroker Cam Stage 2

Texas Speed and Performance Gen 3 Hemi Stroker Cam Stage 2

Unlock the potential of your big cubic inch Hemi engine with the Texas Speed and Performance Gen 3 Hemi Stroker Camshaft. Designed for max effort naturally aspirated applications, this camshaft delivers significant peak power and high RPM performance.

Camshaft Specifications

• Duration @ .050” (Intake/Exhaust): 247°/259°
• Lift (Intake/Exhaust): .622"/.618"
• LSA: 112°
• ICL: 110°

*** VCT Lockout is Required to Run this Camshaft ***

Engine Compatibility

• Best Suited For: 2009+ Gen 3 Hemi Stroker 410+ Cubic Inch

Performance Highlights

• Power Output: 715 Peak HP, 575 Peak Torque
• Operating RPM Range: 1000-7500 RPM (max)
• Drivability: Max effort naturally aspirated applications

Required Components

• Valve Springs: PAC-1232X or PRC-VS2226 springs required
• Pushrods: TSP 3/8 Pushrods required
• Pistons: Aftermarket pistons with valve reliefs required

Recommended Components

• Retainers: TSP titanium retainers
• Rocker Braces: TSP rocker shaft braces recommended
• Stall Converter: 3600+ recommended
• Rear Gear: Gear selection varies based on application

Dyno Test Motor Specs

• Short Block: TSP 426 Brawler
• Cylinder Heads: Stock 6.4 heads PRC ported with PAC valve springs and TSP retainers
• Intake: Holley Hi-Ram with 102mm throttle body
• Compression Ratio: 11.3:1
• Camshaft Timing: VCT phaser locked
• Fuel: 93 Octane pump gas

With extensive dyno testing, the Texas Speed and Performance Gen 3 Hemi Stroker Camshaft is engineered to deliver reliable and measurable performance gains, making it an ideal choice for high-performance naturally aspirated Gen 3 Hemi builds.