UPR Products Rear Coil Over Shock Mount Kit 8.8" Universal Weld In
UPR PRODUCTS
SKU #UPR-2006-20
$149.99
Was
$149.99
Was
Was
UPR Products Rear Coil Over Shock Mount Kit 8.8" Universal Weld In This complete UPR Products Rear Coil Over Shock Mount Kit is designed for racers building a custom rear suspension setup using coil over shocks on a Mustang 8.8-inch rear axle. The kit provides a strong, lightweight solution while allowing the rear shocks to be moved inward for maximum tire clearance.
SKU
UPR-2006-20
Qty
UPR Products Rear Coil Over Shock Mount Kit 8.8" Universal Weld In
This complete UPR Products Rear Coil Over Shock Mount Kit is designed for racers building a custom rear suspension setup using coil over shocks on a Mustang 8.8-inch rear axle. The kit provides a strong, lightweight solution while allowing the rear shocks to be moved inward for maximum tire clearance.
The system features a lightweight 36-inch long, 1 5/8-inch chrome moly mounting tube along with zinc-plated lower shock mounts. UPR uses larger 1/2-inch Grade 8 shock bracket hardware compared to the standard 3/8-inch hardware commonly found in other kits, providing a strong and durable mounting solution for performance applications.
The axle mounting brackets are laser cut specifically for the 2.88-inch diameter Mustang 8.8 rear axle. For Explorer 8.8 or Ford 9-inch rear axles with a 3-inch axle tube diameter, see UPR part number 2006-27 or 2006-124.
Typical installation time is approximately 3-6 hours. This is a universal weld-in kit and requires fabrication and welding for installation.
Product Features
- Complete rear coil over shock mounting kit.
- Universal weld-in design.
- Designed for coil over shock applications.
- Fits 2.88-inch diameter Mustang 8.8 rear axle tubes.
- 36-inch long 1 5/8-inch chrome moly mounting tube.
- Zinc-plated lower shock mounts.
- Larger 1/2-inch Grade 8 shock bracket hardware.
- Grade 8 mounting hardware included.
- Moves the shocks inward for maximum tire clearance.
- Laser-cut axle mounting brackets.
- Typical installation time of approximately 3-6 hours.
- Made in the USA.
Fits These Vehicles
1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Ford Mustang LX GT GTS Bullitt Mach 1 Cobra Roush Saleen with 2.88-inch diameter Mustang 8.8 rear axle.
Notes
- Does not fit Cobra models equipped with factory IRS.
- For Explorer 8.8 or Ford 9-inch axles with a 3-inch axle diameter, see UPR part number 2006-27 or 2006-124.
- Welding and fabrication are required for installation.
Loading products…
Loading...