Wilwood 1/8-27 NPT W/Bracket Flexline Kit

Wilwood 30-Inch 1/8-27 NPT Flexline Kit with Brackets

Complete your compatible Wilwood disc brake installation with the Wilwood 1/8-27 NPT Flexline Kit with Brackets. This application-specific hydraulic brake line kit combines premium stainless steel braided -3 flexlines with the fittings, retaining clips and mounting brackets required for a secure brake hose installation.

The kit includes two 30.00-inch -3 flexlines with straight -3 female hose ends. The chassis side is compatible with either an M10 x 1.0 inverted flare or M10 x 1.5 inverted flare connection, while the caliper side uses a 90-degree 1/8-27 NPT fitting. Wilwood also includes line brackets and chassis clips to properly retain and route the brake hoses.

Product Features:

• Wilwood Stainless Steel Braided Flexline Kit
• 30.00" Flexline Length
• -3 Hose Size
• Straight -3 Female Flexline Ends
• M10 x 1.0 or M10 x 1.5 Inverted Flare Chassis Connection
• 90-Degree 1/8-27 NPT Caliper Connection
• Two Flexlines Included Per Kit
• Includes Two Chassis Fitting Options
• Includes Caliper Fittings
• Includes Chassis Retaining Clips
• Includes Line Brackets
• Designed for Application-Specific Wilwood Disc Brake Kits
• Performance Replacement for Compatible OE Rubber Brake Hoses

Specifications:

Application:

• Compatible Wilwood Disc Brake Kits Requiring 30.00" -3 Flexlines
• Applications Using M10 x 1.0 Inverted Flare Chassis Connections
• Applications Using M10 x 1.5 Inverted Flare Chassis Connections
• Compatible Wilwood Calipers Using 90-Degree 1/8-27 NPT Connections

Kit Contents:

• Two 30.00" Stainless Steel Braided -3 Brake Flexlines
• 90-Degree 1/8-27 NPT Caliper Fittings
• M10 x 1.0 Inverted Flare Chassis Fittings
• M10 x 1.5 Inverted Flare Chassis Fittings
• Chassis Retaining Clips
• Line Brackets 250-12864 and 250-12865
• Required Flexline Installation Components

Fitment Notes:

• Wilwood identifies part number 220-14112 as "FLEXLINE KIT,30in.,-3 HOSE,M10-1.0/1.5 IF 90 DEG,1/8-27 NPT W/BRACKET."
• This is an application-specific Wilwood flexline kit rather than a vehicle-specific product with a published year, make and model listing.
• Uses two 30.00" long -3 stainless steel braided flexlines.
• Both flexline ends use straight -3 female connections.
• Supports M10 x 1.0 or M10 x 1.5 inverted flare chassis connections.
• Chassis fitting part numbers are 220-6413 and 220-13923.
• Uses 90-degree 1/8-27 NPT caliper fittings.
• Caliper fitting part number is 220-13125.
• Chassis retaining clip part number is 300-15780.
• Includes line brackets 250-12864 and 250-12865.
• This kit does not include brake calipers, rotors or brake pads.
• Vehicle fitment should be determined by the compatible Wilwood brake kit and required chassis fitting size.